Providing quality products and services today for a safer tomorrow
General Tools 120 -125 Pipe And Tubing Cutter W/Rollers 1/8"TO 1-1/8" OD
General Tools 120 -125 Pipe And Tubing Cutter W/Rollers 1/8"TO 1-1/8" OD 125= 1/4" 1 5/8"
General’s professional Tubing Cutter is our most comfortable and easy-to-use model, designed for a lifetime of dependable use.
Smooth-action retractable jaws expand for tubing sizes from 1/8” to 1-1/8”, and up to 3/16” in thickness. 125= 1/4" 1 5/8"
The cutter easily slices through copper, aluminum, brass, stainless steel and other tin-wall tubing.
Uses the RW122 cutting wheel made from bearing tool steel for superior cutting power.
Includes a retractable reamer with dual cutting edges.
General Tools’ Model 120 Standard Tubing Cutter’s anti-friction, flare-groove rollers let you cut tubing close to flared ends,
avoiding tubing replacements in existing installations.
It has a 1/8" to 1-1/8" capacity.
Hardened steel reamer slides and locks in place.
It retracts for safety when not in use.
Features comfort-grip design.
1/8” to 1-1/8” tubing sizes.
Contoured head with comfort grip for easy turning.
Large adjusting knob for greater torque on pipe.
Knob contains storage compartment for extra cutting wheels.
For copper, aluminum, brass and thin-wall stainless steel up to 3/16” thickness.
Grooved rollers accept flared pipe ends to provide cuts directly below the flare.
Cutting wheel is made from bearing tool steel for maximum durability.
Full-size, fold-out reamer with dual edges.
Replacement wheel RW122.
Position tubing cutter around pipe and tighten knob until pipe is snug between blade and rollers.
Turn the knob an extra one-half revolution for the first cut.
Spin tubing cutter around the pipe, making complete revolutions.
Do not spin the cutter back and forth as this may bend the pipe.
As the tool begins to cut the pipe, tighten the knob to keep pressure on the cutting surface.
Continue spinning the cutter and tightening the adjustment knob until the pipe is cut.
Use a reamer to remove any burrs formed on the surface of the pipe.
Cutting Flared Pipe:
Insert the flared end of the pipe into the tubing cutter.
Align the pipe so that the flare sits in the grooved rollers.
Tighten the adjustment knob until the blade is contacting the pipe below the flare.
Follow the tube cutting procedure above.
We would like to thank you for stopping by.
Our main Office is located at
43014 Christy Street Fremont Ca 94538
Phone ...(510) 794-8723